Officina Navale NANNI S.r.l con socio unico
Sito:
http://www.italwinch.com
- E-mail:
4
INSTALLING THE CAPSTAN
Extra care should be exercised when handling polished parts to avoid any damage to polished surfaces.
Apply an anti-seize compound generously over thread of all screws, before fastening them.
To install in the vessel:
Mount the capstan on the deck:
1. Fix the capstan base to the deck in the needed position by welding or screws.
2. Lift the motor-gearbox from the bottom into the base in the needed position and fix it by supplied screws.
3. From the top fix the bearing and seal holder on the base
4. Insert the drum on the shaft and screw completely the top cap.
ATTENTION:
Apply grease to the main shaft and on each screw before fit all the parts.
