EV-020
Rev. 03 – 2006
English
42
Once the “Sensor Detection” function has recognised a “Standard” type sensor
instead of a “Project” sensor, when the “Sensor Calibrat.” menu is entered again,
the menu options will “configure” themselves according to the sensor detected.
Standard and X.. Project series
sensor menu
Sensor Calibrat
Barb. Circ.
3 3 . 0
E x i t
500 – 1000 – 1500 –2000 W Project
series sensor menu
Sensor Calibrat
Red. Factor
5 7 . 0
E x i t
Barbotin Circumference
In this row the user must enter the
circumference of the gipsy (in
centimetres or inches). Use the Table 1
provided to calculate the
circumference.
Settable values: centimetres or inches.
Default value, 33 cm.
Reduction Factor
In this row the user must enter the
reduction factor. See next Table 2 for the
correct value to be entered
Default value, 57.
Select with
Select value with
Confirm with
Exit
To return to the settings menu.
Confirm with
Summary of Contents for EV-020
Page 123: ......
