10
Heart Rate Monitor Setup
CHARGE BATTERY
A red light indicates your heart rate monitor needs to
be charged.
1. Place the OH1 sensor into the USB adapter so that
the metal contacts meet.
2. Plug the USB adapter into a computer USB port
or USB power wall outlet. A flashing yellow light
indicates it is charging. A green light indicates that
it is fully charged.
If your MYX bike is plugged in you can charge your OH1 with the
USB port on the left side of the touchscreen. Check for the orange
light which indicates the USB has been inserted correctly.
USING YOUR HEART RATE MONITOR
1. Remove the sensor from the charging adaptor, and
place it in the holder on the arm band so the sensing
side is exposed.
2. Put the arm band on your upper forearm or bicep so
that the sensor touches your skin.
3. Press the silver button once to turn on. A blinking
green light means it has detected your heartbeat.
4. Choose a workout on the MYX touchscreen. At the
top right of the workout details screen, choose Tap
to Pair “HR Monitor”.
Your heart rate monitor can also be paired by pressing the heart-
shaped icon during a workout.
5. After your workout, press and hold the OH1 button
to turn off the heart rate monitor.
1
1
2
3
Summary of Contents for MYX
Page 1: ...1 Product Manual ...
