9
TABLET AND MOUNTING ARM
Your tablet will be assembled by the setup team, but
it can be easily removed and reattached for ease of
transportation later.
Disassembly
1. Remove the plastic covers to reveal the mounting
screws. Have one person support the tablet while
the other person uses the 4mm Phillips screwdriver
from the toolkit to remove the four 4mm screws at
the back of the tablet.
2. Lift off the tablet and set the screws aside.
3. Have one person support the mounting arm,
while the other loosens and removes the two
9mm screws.
4. Remove the mounting arm and the oval
mounting plate.
Assembly
1. Align oval mounting plate with the two holes at the
center of the bottle holder bracket.
2. Align mounting arm below the bottle holder
bracket.
3. Insert and tighten two 9mm mounting screws
through the oval plate, bracket holes, and into the
holes on the mounting arm.
4. Align the tablet with the 4-hole plate at the top of
the mounting arm.
5. Insert four 4mm screws through the plate
and into the mounting holes in the back of tablet
and tighten. Replace the plastic covers.
3
2
1
3
4
1
2
5
4
Use two people to remove or reattach the
tablet and mounting arm.
Summary of Contents for MYX II
Page 1: ...1 Product Manual ...
