Mytrex myActive Alert User Instructions Download Page 5

 

5 | 

P a g e

 

 

 

Important:

  Changes or modifications to this unit not expressly approved by the responsible 

party for compliance may void the user’s authority to operate the equipment.

 

 

Infrequently used radio links should be tested regularly to protect against undetected 
interference or fault.  The Manufacturer suggests testing at least weekly.

 

 

A general knowledge of radio and its vagaries should be gained prior to acting as a 
wholesale distributor, dealer, or installer and these facts should be communicated to the 
ultimate user.

 

Other Notices 

 

This product incorporates BioSensics ActivePERS technology, Protected by 
US Patents #8,206,325, #9,005,141 and other patents pending 
(

www.biosensices.com/patents

).  

 

ActivePERS technology does not detect falls with perfect accuracy or 
precision.  If you need help, you must always push the help button on 
your wearable device or base unit. 

Battery Warning 

This product contains a lithium battery. Lithium batteries can explode, leak, catch fire or 
cause burns if not handled appropriately. Do not disassemble, puncture or crush 
battery. Avoid exposure to water, fire or high temperatures. Properly dispose of the 
myActive Alert.  
 

 

Summary of Contents for myActive Alert







Reviews: