background image

8

Safety Instructions

• The scooter is only intended for use by one person.
•  Only use the scooter on surfaces that are suitable for it, i.e. those which are flat, clean, dry, 

and use the scooter where possible away from other road users. Avoid sloping ground. The 
brakes may become hot if the scooter has been used for a while! They shouldn’t be touched 
until they have cooled down.

• Always be considerate of others.
•  Wear suitable protective clothing for your own safety. Never use the scooter without a helmet 

and hand/wrist, elbow and knee pads. Never use the scooter without shoes!

•  Before you begin – Ensure that all fasteners and locking parts are intact and tight, e.g. the 

folding mechanism and the height setting of the handlebar. The functions of self-securing 
screw threads can be impaired after repeated loosening and tightening of the connecting  
elements. Check especially for the correct alignment and fastening of the steering set-up.

• Make sure that the stand is folded safely while driving.
•  Do not use the scooter at twilight, at night or in poor visibility. Do not use it on roads or  

thorough fares or on slopes or hills. Avoid being in the proximity of stairs and open water.

• The scooter is not suitable for jumps.
•  The scooter is not a vehicle in the sense of the road traffic regulations! It is intended for use 

on footpaths.

•  The use of the product requires specific skills and knowledge to be able to avoid injuries  

due to crashes and collisions. Always adjust according to the age of the user and use for the 
purpose it has been designed for.

•  Ensure when riding that the logo on the handlebar points to the front or else that the push 

buttons is as such oriented backwards.

•  Please, do not make any modifications other than according to this manufacturer instruction 

shall be made.

EN

Summary of Contents for 205











Reviews: