Jeep
®
life, simplified.
Jeep
®
life, simplified.
Showroom: 2195 Defoor Hills Road NW, Suite M | Atlanta, GA 30318
(855) 382-1744 | [email protected]
@myTopUS
#myTopWave
IMPORTANT SAFETY INFORMATION
Please read the installation instructions and all of the safety information in their
entirety before starting installation. Please read the owner’s manual and heed all
safe operation and safety warnings in the manual. Please keep these instructions
and safety information for future reference and follow all instructions and
information as outlined in this manual. We strongly urge you to view the
Installation instructions found at the myTop website: www.mytop.us. While we have
prepared this installation guide believing it to be complete and accurate, you may
encounter difficulty in one or more steps. Your vehicle may have been modified in a
fashion that may require additional assistance, or your Jeep tub, doors, and wind-
shield frame may vary in measurement or dimension. In the event you experience
difficulty with your installation contact myTop for assistance with your installation
at +1 888-556-9867.
GENERAL SAFETY GUIDELINES
Installation of the myTop on your vehicle requires knowledge of the use of both
hand tools and power tools. Installation requires general knowledge of automotive
electrical systems. Installation requires lifting a heavy object which requires a min-
imum of 2 individuals to lift the myTop and place it onto your Jeep Wrangler. Do not
attempt to lift the unit onto the Jeep by yourself.
Please note the following general warnings to prevent injury or damage:
1.
READ
these instructions and warnings:
KEEP
these instructions and warnings;
HEED
all warnings and
FOLLOW
all instructions.
2.
ALWAYS
take care when using hand tools and especially with power tools. Use
tool only as intended by manufacturer. Use correct size and type of tool for each
step.
INSPECT
all tools before use, do not use tools which are loose or broken.
Keep all hand and power tools away from children. Keep clear of drill bit
operation during operation.
3.
ALWAYS
wear eye protection in work areas (ex: ANSI-approved safety goggles).
4.
TAKE CARE
when using any cutting tools to avoid serious injury or death.
5.
IF
an accident or injury occurs, seek qualified assistance from qualified
personnel, such as a fire department, emergency medical technicians,
police department, or trained medical personnel.
6.
IF
you believe that any step is unclear, or beyond your capability, please seek
qualified assistance.
7.
SAVE
these warnings.
Failure to comply with the above requirements may result in personal injury
or death. Please take a moment to review the following safety information.