11
1.800.228.7148 www.definitivetech.com
EN
Bi-wiring
Bi-wiring in effect provides the midrange drivers and tweeter with separate
signal paths, improving their damping factor and reproducing recorded mate-
rial with greater clarity, depth and detail. each mythos St-L Super tower has
a set of Bi-wire (high level) 5-way binding posts, and an Lfe input. Simply
run separate speaker wires to the low and high frequency drivers from a
single amplifier.
Note
: You must remove the jumper strips that connect the terminals before you
bi-wire your loudspeakers.
connect one set of speaker wires to the upper terminals (tweeter) on
each speaker and one set of wires to the lower terminals (midrange/
subwoofer). connect the other ends of both wire sets to the corresponding
amplifier outputs.
Important Note
: Both speakers must be connected in the same way (in correct
polarity) to their own channel of the amplifier. If you experience a great lack of
bass, it’s likely that one speaker is out of polarity with the other.
AMPLIFIER
LEFT CHANNEL
RIGHT CHANNEL
Bi-wiring
Summary of Contents for ST-L
Page 1: ...Owner s Manual ...
