MyTek The Brooklyn Owner'S Manual Download Page 19

User’s Manual

19

13. Warranty

Each individual Brooklyn DAC undergoes comprehensive quality control and a complete test before 

shipping.  This  Brooklyn  DAC  is  warranted  by  Mytek  to  the  original  purchaser  against  defects  in 

workmanship and materials used in manufacture for a period of two years from the date of purchase.
Faults  due  to  customer  misuse,  unauthorized  modifications  or  accidents  are  not  covered  by  this 

warranty. No other warranty is expressed or implied.
If you suspect that your product is faulty, please contact your local retailer. Prior to shipping customer 

or retailer must obtain an RMA number from Mytek for warranty services. Units sent without RMA 

number will not be accepted.
Mytek extends affordable repair service for all units manufactured to date that are

Important Safety Information

• 

Read, keep and follow these instructions.

• 

Connect all your devices before powering the unit.

• 

Do not expose this device to moisture, rain and liquid of any kind.

• 

Clean only with dry cloth.

• 

If any form of liquid or a forin object enter the device switch it off and unplug it from the power 

source. Do not operate device until the foreign object is removed or the liquid has completly 

dried. If doubt please contact Mytek Digital.

• 

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

• 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 

two blades with one wider than the other. A grounding-type plug has two blades and a third 

grounding prong. The wide blade or the third prong are provided for your safety. If the provided 

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• 

Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs,  convenience 

receptacles, and the point where they exit from the apparatus.

• 

Only use attachments/accessories specified by the manufacturer.

• 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury 

from tip-over.

• 

Unplug this apparatus during lightning storms or when unused for long periods of time.

• 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, 

does not operate normally, or has been dropped.

Summary of Contents for The Brooklyn





















Reviews: