17
1. Highlight a profile in the Auto Selected Profiles box.
2. Click
Move Up
,
Move Down
, or
Remove
as appropriate.
The first profile in the Auto Selected Profiles box has highest priority,
and the last profile has lowest priority.
3. Click
OK
.
4. Check the
Auto Select Profiles
box.
5. Save the modified configuration file.
When auto profile selection is enabled by checking
Auto Select Profiles
on the Profile Management tab, the client adapter scans for an
available network. The profile with the highest priority and the same
SSID as one of the found networks is the one that is used to connect to
the network. If the connection fails, the client adapter tries the next
highest priority profile that matches the SSID, and so on.
With auto profile selection enabled, th e wireless adapter scans for available
networks. The highest priority profile with the same SSID as a found network
is used to connect to the network. On a failed connection, the client adapter
tries with the next highest priority profile.
5.2.3 Diagnostics
The Diagnostics tab of the Atheros Client Utility provides buttons used to
retrieve receive and transmit statistics. The Diagnostics tab does not require
any configuration.
The Diagnostics tab lists the following receive and transmit diagnostics for
frames received by or transmitted by the wireless network adapter:
Multicast packets transmitted and received
Broadcast packets transmitted and received
Unicast packets transmitted and received
Total bytes transmitted and received
Click the Adapter Information button for more general information about the
the wireless network adapter and the network driver interface specification
(NDIS) driver.
