USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 1.2
25
MAC Address
Fill in the MAC address of AP to register the wireless
distribution system access capability.
Data Rate
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 1M to 54Mbps or MCS.
Comment
Fill in the comment tag for the registered AP.
Apply Changes
Click the
Apply Changes
button to register the AP to new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Set Security
Click button to configure wireless security like
WEP(64bits), WEP(128bits), WPA(TKIP), WPA2(AES)
or
None
Show Statistics
It shows the TX, RX packets, rate statistics
Delete Selected
Click to delete the selected clients that will be removed
from the wireless distribution system.
Delete All
Click to delete all the registered APs from the wireless
distribution system allowed list.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
I
WDS Security Setup
Requirement: Set [Wireless]->[Basic Settings]->[Mode]->AP+WDS
This page is used to configure the wireless security between APs.
Refer to 3.3.6 Wireless Security Setup.
