PUMP
After the machine has been plugged into a 20 amp grounded
outlet, turn on pump. Key tool until upholstery tool releases a
steady flow.
ATTACH HOSES
Firmly attach hose and quick disconnect. Make sure quick discon-
nects snap together firmly. Once attached to unit connect Q.D. to
upholstery tool. Always inspect hoses for cracks or fraying.
VACUUM MOTOR
Turn on vacuum motor and begin cleaning. For best results
make two dry passes to every wet pass.
HEATER
Release tool trigger. Turn on heater. Wait 8 – 10 minutes for unit
to pre-heat. Once heated, re-key upholstery tool until hot water
begins flowing. Once hot water is flowing, release trigger and pre-
heat an additional 4 – 5 minutes.
VACUUM PUMP
HEA
TER
VACUUM PUMP
HEA
TER
VACUUM PUMP
HEA
TER