background image

5

Important Safety Information

2.  Use only as described in this manual. Use only manufacturer’s 
recommended attachments. 

3.  Always unplug power cord from electrical outlet before at-
tempting any adjustments or repairs. 

4.  Do not unplug by pulling on cord. To unplug, grasp the plug, 
not the cord. 

5.  Do not pull or carry by cord. Do not close a door on cord or 
pull cord around sharp edges or corners. 

6.  Do not run appliance over cord. Keep cord away from heated 
surfaces.  

7.  Do not use with damaged cord or plug. If cord is damaged, 
repair immediately. 

8.  Do not use outdoors or on wet surfaces and/or standing 
water. 

9.  Always unplug or disconnect the appliance from power 
supply when not in use. 

10.  Do not allow to be used as a toy. Close attention is 
necessary when used by or near children. 

11.  Do not use in areas where flammable or combustible 
material may be present. 

12.  Do not leave the unit exposed to harsh weather elements. 
Temperatures below freezing may damage components and 
void warranty. 

13.  Use only the appropriate handles to move and lift unit. Do 
not use any other parts of this machine for this purpose. 

14.  Keep hair, loose clothing, fingers, and all parts of the body 
away from all openings and moving parts. 

15.  Use extra care when using on stairs. 

16.  To reduce the risk of fire or electric shock, do not use this 
machine with a solid-state speed control device. 

17.  The voltage and frequency indicated on the name plate 
must correspond to the wall receptacle supply voltage.

18.  When cleaning and servicing the machine, local or national 
regulations may apply to the safe disposal of liquids which 
may contain: chemicals, grease, oil, acid, alkalines, or other 
dangerous liquids. 

19.  Do not leave operating unattended.

Summary of Contents for Spinners 8903















Reviews: