Mytee PowerGlide HD-17, Instruction Manual

Page: 4 / 12

4
POSITION GEAR ADjuSTmENT HEIGHT LEVER
The handle can be adjusted to any desired working position by
simply squeezing the adjustment lever. Move the handle to the
desired position, then release adjustment lever locking handle
in place.
Once you release adjustment height lever, handle will lock on
to gear.
When not in use, loosely wind the power cord around the cord
storage hook on the handle shaft and handle grip.
Note: Disconnect the power cord from electrical outlet before
installing a brush or pad driver. ON - Push the brush or pad driver
firmly in position, then turn it counter-clockwise until it locks into
place. REMOVE - Turn clockwise until it stops, then lift off.
ON OFF
BRuSH AND PAD DRIVER INSTALLATION CORD STORAGE HOOK
HD17 / HD20 POWERGLIDE™