Mytee firebird vs1500, Instruction Manual, Page: 9 / 16

9
FIREBIRD™ VS1500
GUN SAFETY LOCK
PLUG
Plug the Firebird™ into a properly installed socket.
POWER BUTTON
The above arrow points to the power button. Pressing this button
will turn the unit “On” or “Off”.
The green operating pilot lamp and the orange heating pilot lamp
light up. The operating pilot lamp lights up as soon as the Firebird™
has been plugged in and switched on. The heating pilot lamp indi-
cates that the steam cleaner is currently heating up. The operating
temperature is reached after approx. 11 minutes and the orange
heating pilot lamp goes out. The appliance is now ready for use.
Release the locking device (child-proof device) by pushing the yellow triangular pin on the right-hand side of the Firebird™ in towards the left.
Hot steam now escapes if the steam button is operated. First of all hold the steam gun over an old cloth to absorb any initial spray water.
Operate the steam button until the steam is emitted evenly. Cleaning can now begin.
Never aim the steam outlet of the steam gun at people,
animals, plants or electrical systems (e.g. oven or
socket). There is a risk of scalding or electric shock!
Always test the steam cleaner first on inconspicuous
or invisible areas of the surfaces or fabrics to be cleaned
to check their tolerance to hot steam.
- Steam may result in bleaching of painted/varnished wood.
- Steam may discolor shiny plastics.
- Acrylic, velvet and linen react very sensitively to the
temperature of steam.
- Do not use the steam cleaner on Dralon fibres
without first having carried out a suitability test on a
concealed area.
For understandable reasons, the manufacturer cannot
be held responsible for damage to objects, materials,
people, animals or plants that occurs due to unsuitable
use of hot steam or due to improper use of the appliance.
Residual steam continues to escape for a few seconds
after switching off the steam function.
NOTE: