14
4 - MACHINE MAINTENANCE
In order to keep the Orbital Floor Machine running
smoothly and reduce the risk of damage to the machine
and subsequent downtime, Mytee recommends following
the maintenance schedule to the right:
Maintenance Item
Daily
Weekly
Clean and inspect motor.
X
Check power supply cable.
X
Clean machine with all purpose
cleaner and cloth.
X
Inspect machine for water leaks and
loose hardware.
X
1. Remove the pad driver assembly
by removing the four bolts with a 7/16”
wrench or socket.
2. Using a 3/16” Allen wrench, undo
the two Allen bolts holding the bearing
onto the flywheel.
3. Remove the Allen bolts from the
bearing and apply Blue Loctite
®
.
4. Insert the Allen bolts into the new
bearing and line up the bolts with the
holes on the flywheel.
5. Using the 3/16” Allen wrench, bolt
the new bearing onto the flywheel.
6. Apply Blue Loctite
®
to the pad
driver bolts and bolt it back onto the
machine.
♦
4.1 - Flywheel Bearing Replacement
The flywheel bearing is a wear part, similar to rotors on a
car. Over time, the bearing will require replacing.
Tools Needed:
• 7/16” open-ended wrench or socket
• 3/16” Allen wrench
• Blue Loctite
®
