6
HEATER
Release tool trigger. Turn on heater. Wait 8 – 10 minutes
for unit to pre-heat. Once heated, squeeze cleaning tool
trigger again until hot water begins flowing. Once hot water
is flowing, release trigger and pre-heat an additional 4 – 5
minutes.
VACUUM PUMP
HEA
TER
PUMP
After the machine has been plugged into a 20 amp
grounded outlet. Turn on pump. Squeeze cleaning tool
trigger until it releases a steady flow.
VACUUM PUMP
HEA
TER
Turn on vacuum motor and begin cleaning. For best
results make two dry passes to every wet pass.
VACUUM MOTOR
VACUUM PUMP
HEA
TER
20-110 DELUXE PREP CENTER™
CHEMICAL DISPENSING
Four individual chemical bottles. Bottles are powered by
an external compressed air source (not included). Just
unscrew cap and add in chemical.
Summary of Contents for Deluxe Prep-Center 20-110
Page 12: ...NOTES...