9
2 - Machine Operation
2.1 - Powering the
Carpet Shark™
The Carpet Shark™ requires
a 15 amp, 115V power
outlet to operate.
Plug the female end of the
lighted extension cord into
the Carpet Shark’s™ pigtail
power cord and plug the
male end of the extension
cord into a wall outlet.
♦
2.2 - Attaching Accessories
The Carpet Shark™ attach-
ments can be connected
to the front and back of the
machine via the pegs. On
the front, slide the attach-
ment to the left to lock it in
place. On the rear, slide it to
the right.
To remove the attachment,
push in on the push button,
slide the attachment to the
right, and lift off of the machine.
♦
2.3 - Switching Out Brushes
To remove a brush, slide out the brush axle from the side
panel of the machine and take out the brush.
To install a brush, put the brush in place on the underside
of the machine and slide the brush axle through until it
is secured by the push pin on the opposite side of the
machine.
♦
2.4 - Operating the Carpet Shark™
To start the machine, press in the power switch on the
rear of the machine and pull back the handle. With the
handle at a comfortable height, move the Carpet Shark™
back and forth over the surface being cleaned.
♦
FRONT
REAR