ia11
Warning - Initial setup
To prevent serious injury, electrical shock or fire:
• Do not operate with bottom plate removed.
• Keep away from rain and moisture.
• Always disconnect all cable connections before changing fuses and/or
tubes.
• Do not replace tubes without reading instructions.
• Do not replace fuses or tubes if you have any doubt about your ability to
do so. We accept no responsibility for any personal or material damage
due to incompetent use or users.
• Remove the Mystère ia11 from its packaging. Use the white gloves.
• Remove the tube cage by pulling it up and away from the amplifier.
• Remove the protective foam surrounding the tubes.
• Check that each tube is firmly seated in its socket. Use the white
gloves.
• Replace cage back in its place if desired.
• Check to see the power switch is off (down).
• Connect each source to the corresponding plugs.
• Connect your speaker wires, positive to positive, negative to negative, to
your integrated amplifier.
• Plug the powercord into the amplifier, then into the wall socket.
• Switch the amplifier on and wait for 30-60 seconds to warm up the
tubes. Other parts will need more time to sound at their best, specially
the first time you use the amplifier.
Mystère
Contents
1x Mystère ia11
Integrated amplifier
1x Power Cord
1x Owner’s Manual
1x White Gloves
Tubes 4x 6SN7
4x EL34
Fuses Littelfuse Series 218 or 219
1 x 3,15AT (100-120VAC)
1 x 1,6AT (200-240VAC)
Warning
Do not replace fuses with any
fuse other than the same type
and rating as used by the factory.
