3
•
It takes about 3 hours to charge the headset fully.
Warning:
•
The battery is rechargeable.
•
First time charging : Before you use this Bluetooth headset, please charge the battery
of headset fully
How to use
A Switching on / off headset
Function
Operation
LED indicator
Indication tone
Switch on
Press and hold the
MFB for 3 seconds
Blue LED is on for 1
second
“Do Do Do” tone
Switch off
Press and hold the
MFB for 6 seconds
Red LED is on for 1
second
“Do Do DO” tone
B Pairing the headset with Bluetooth devices
A) How to enter pairing mode
Be sure BH-03 in power off status first. Press and hold the MFB for 6 seconds, till Red
and blue Led blink alternately, or you hear the indication “Do Do” twice come out. And then
release the MFB. The unit will become pairing mode.
B) Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures were not the same with different mobile phone. Please refer to
your mobile phone manual for further information. Steps as follows:
a)
Please keep the headset and mobile phone in the range of 1 meter when pairing.
b)
Start the Bluetooth function of mobile phone and search the Bluetooth devices.
c)
Make the headset enter into pairing mode (Please refer to “how to enter into pairing
mode”).
After searched, select “BH-03”in the Bluetooth device list.
a)
According to indication, enter password or PIN No:”0000”, and press the key of” Yes”
or “confirmed”.