Myson iVector S2, Installation Manual

Page: 34 / 40

34
iVector S2
Installation manual
iVector S2 • 2022-07-01
US
User instructions
A B
A
Display
B
Keys
8.2 Display
Status and alarms are shown on the display by using
the specific symbols below:
Automatic Cooling mode
Silent mode Flashing when presence switch CP closed
Maximum fan speed Alarm indicator (solid light)
Night-time mode Panel off indicator
Heating mode (not applicable for this model)
8.3 Key function
The various functions are set using 8 backlit keys
Temp + is for increasing the set temperature
Night-time mode: limits fan speed to a set
level and the room temperature will fluctuate
Temp - is for decreasing the set temperature
Maximum fan speed: Allows for the maximum
fan speed to be set
Heating / Cooling: for changing between
heating and cooling modes ON/Stand-By: for activating the device or for
putting it in stand-by
Sets the fan speed automatically Silent: limits fan speed to a lower value
8.1 Onboard and remote-mounted control operation
These controls provide room temperature regulation
in AUTO, SILENT, NIGHT and MAX programmes by
using a temperature probe mounted in the lower part
of the unit (onboard controls) or in the remote-mounted
control.
The control panel has a memory, so settings will not
be lost if the appliance is switched off or if the power
supply is cut.
Anti-freeze protection is provided even in stand-
by mode.
After 20 seconds from the last action, the
panel brightness will be reduced, and the room
temperature will appear on the display. Press
any key to restore maximum brightness.
Faults on individual connected units will
not be shown on the remote mounted
control.