19
iVECTOR Heater/Cooler
13.0
14.0 Maintenance
Disconnect from the power supply before carrying out maintenance work.
Maintenance should be restricted to occasional removal of dust
and lint around the unit. The outer surface may be wiped over
with warm water and mild detergent taking care to avoid water
entering the grille areas.
Replacing the filter
Periodically the filter will need to be cleaned, and the control
system on this product will display ‘FILT’ when it is time for the
filter to be checked. Filters can be easily removed for cleaning as
shown below. See spare parts list section if replacement filters
are needed.
Remove the old filter
Place the new filter
15.0 Spare Parts & Accessories
Part No
Size (mm)
iV080
iV100
iV120
iV140
iV160
1290027 495
1
1
1
1290028 695
1
1
1290029
400
1
1
2
Filters
System Valve
Condensate pump kit
Pressure independent balancing and
control valve with 230V actuator
230V Condensate pump kit including
mounting brackets, float switch, and 2m
flexible tube for condensate removal.
ACC 01
ACC 02
Accessories
Description
Technical Information
Part No
14.0
15.0
24197 iVector Installation Guide V2_Layout 1 28/11/2011 14:49 Page 20
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [email protected] 0844 556 1818
