mySmartObject IOT-710 Quick Start Manual Download Page 2

GPS Asset tracker

IOT-710

Please read carefully before use. 

5. Mobile app

The MySmartObject app is available : 

9. Caution & Notice

Download the app

on the App Store or

Google Play Store,

depending on your

smartphone type.

Use this QR code to

download the app

user guide : 

To add a new device to your mobile 

app account, click the [+] button and 

scan the device bar code or enter 

manually the IMEI number indicated

on the packaging. 

Use your credentials to login and 

then complete your personal

information. 

To create geofence, select a zone 

manually and then choose if you

want to receive an alert when

entering ou leaving this zone. 

You can choose if you want to 

receive an alert via email or a Push 

notification. 

You  will be able to 

access the real time 

location of your

vehicle, object or 

person, its latest

positions and trips. 

3.3 Remove alert

In ultra-standby mode, after device is fixed for 3 

minutes, it enters into arming status. In this case if 

the device detects itself being removed/taken off 

from the target, alert would be automatically 

uploaded. Device would enter into tracking mode for 

20 minutes and then turn back to ultra-standby 

mode. 

If device receives command to cancel the alert 

within these 20 minutes, it would instantly turn back 

to ultra-standby mode. Anti-removed mode would 

activate again in 3 minutes. 

Issue command from the platform to cancel the 

Remove alert : 

cancel#

• Please use the original battery from 

factory. Any unauthorized accessory 

would invalidate warranty service. 

• Manufacturer shall not bear any 

responsibility from any damage caused 

by unauthorized accessory. 

• Do not dip the battery into water or fire. 

• Do not distort or break the battery.

Do no disassemble the device. 

• Battery is disposable, not allowed for 

recharge. 

4. Installation

To fix the device on an asset, please stick the 3M 

foam tape on the backside of the non-magnetic 

model to your target. For magnetic model, directly 

stick it on the metal. 

Reviews: