1.In brief
MySmartObject®
IOT-710
Quick start guide
1.2 Spectifications
1.1 Features
• Low battery alert
• Small and light
• 3 years standby time
• IP66 dust and waterproof
• Remove-alert
• Remote setting
• GPS + LBS location
Communication
GSM
850/900/1800/1900MHZ
Location Accuracy
<10 meters
Voice monitoring
range
≤5
meters
Working current
60mA
Standby time
3 years (1 position/day)
Working
temperature
-20°C to 70°C
Dimension
80mm(L)*50mm(W)*30mm
(H)
2. Appearance
Quick flashing
Low battery
Slow flashing
Normal
No light
Power loss or sleep mode
3. Getting started
Set SOS number via APP, GPS tracking platform or SMS
(SMS only valid at tracking mode).
1.SMS command to add SOS number:
SOS,A,number 1,number 2,number 3#
E.g.SOS,A,1351234xxxx,1371234xxxx,1301234xxxx#
2.SMS command to delete SOS number:
SOS,D,number sequence 1,number sequence 2, number
sequence 3#
Eg. SOS,D,1,2,3#
3.2 Working mode
Note: When device boots for the first use, there are 3 minutes
time to set the mode.
2.1 Device
2.2 LED display
1) Red LED (power status)
2) Blue LED (GPS status)
Quick flashing
GPS signal searching
Slow flashing
GPS located
No light
GPS is not working or sleep
mode
3) Green LED (GSM satus)
Quick flashing
GSM initializing
Slow flashing
Normal
No light
No GSM signal or no SIM or
sleep mode
3.1 SOS number setting
Please confirm your choice before turning the device on. If
you fail to set the mode in this 3-min period, device will enter
into defaulted mode: Ultra-standby mode. In this case device
will wake up and upload location in 24 hours. Any command
to change the mode would be activated in 24 hours.
1)Ultra-standby mode:
In defaulted mode device wakes up once daily to update one
position, then enters into sleep status, during which period
not any query function could be activated. User can set the
sleep period by SMS command:
MODE,2,T1,T2#
2 means
ultra-standby mode.T1 means the start time of sleeping
period which format is HH:MM.Defaulted setting is the time
when device boots up. T2 means the sleep time interval
which options are 1, 2, 3, 4, 6, 8, 12, 24 (hours). Defaulted
setting is 24 hours.Note: SMS command takes effect after
device wakes up.E.g.MODE,2,13:00,8# (Meaning: Device
starts to fall asleep at 13:00, and wakes up every 8 hours)
2)Tracking mode:
User can set the working period by APP or tracking platform
or SMS.
MODE,1,T1,T2#
1 means tracking mode.
T1 means the time interval to upload location, ranges from
10-1800 (seconds)
T2 means the working duration, ranges from 5-43200
(minutes)
Note: SMS command takes effect after device wakes up.
E.g.MODE,1,30,5# (Meaning: When device wakes up, it
would work for 5 minutes, during which period, it uploads
locations per 30 seconds.)
