Table Top Instructions
For tabletop placement of your Mysa for AC, simply remove the included tabletop stand from
the box and align the two pins on the stand with the two holes located on the back of the Mysa.
Insert the pins until there is a solid connection, and the lines on the pins align. No ‘wiggle’
should occur when placed on your table.
Manual Controls
Mysa for AC can be adjusted manually by pressing the Up or Down arrow to increase
or decrease the temperature. Mysa for AC will display the room temperature at all
times. When manually adjusting the temperature, the setpoint will display, allowing
you to set your ideal climate for the room. Additionally, Mysa for AC includes the
ability to select Mode and Fan control for your air conditioner using two side buttons.
Side Buttons
Mysa for AC also has side buttons for manual control over Mode and Fan settings.
Top (M) Button:
Mode Control - tap to manually cycle through available Modes.
Bottom (Fan) Button:
Fan Control - tap to manually cycle through Fan Speeds.
