Myron L TechPro II, Operation Manual

Page: 28 / 44

24
XVI. ACCESSORIES
A. Conductivity/TDS Standard Solutions (TPH1 & TP1)
Your TechPro II has been factory calibrated with the appropriate Myron L
®
Company NIST traceable KCl, NaCl, and our own 442™ standard
solutions. Most Myron L conductivity standard solution bottles show three
values referenced at 25°C: Conductivity in microsiemens/micromhos,
the ppm/TDS equivalents (based on our 442 Natural Water™), and
NaCl standards. All standards are within ±1.0% of reference solutions.
Available in 2 oz., quarts/liters, and gallon/~3.8 liter bottles.
1. Potassium Chloride (KCl)
The concentrations of these reference solutions are calculated from
data in the International Critical Tables, Vol. 6. The 7000 µS is the
recommended standard.
Order KCL-7000
2. 442 Natural Water™
442 Natural Water Standard Solutions are based on the following salt
proportions: 40% sodium sulfate, 40% sodium bicarbonate, and 20%
sodium chloride, which represent the three predominant components
(anions) in freshwater. This salt ratio has conductivity characteristics
approximating fresh natural waters and was developed by the
Myron L
®
Company over four decades ago. It is used around the world
for measuring both conductivity and TDS in drinking water, ground water,
lakes, streams, etc. 3000 ppm is the recommended standard.
Order 442-3000
3. Sodium Chloride (NaCl)
This is especially useful in sea water mix applications, as sodium chloride
is the major salt component. Most Myron L standard solution labels show
the ppm NaCl equivalent to the conductivity and to ppm 442 values. The
14.0 mS is the recommended standard.
Order NACL-14.0
B. pH Buffer Solutions (TPH1)
pH buffers are available in pH values of 4, 7 and 10. Myron L
®
Company
buffer solutions are traceable to NIST certified pH references and are
color-coded for instant identification. They are also mold inhibited and
accurate to within ±0.01 pH units @ 25°C. Order 4, 7 or 10 buffer.
Available in 2 oz., quarts/liters, and gallon/~3.8 liter bottles.
C. pH Sensor Storage Solution (TPH1)
Myron L pH Sensor Storage Solution prolongs the life of the pH sensor.
Available in 2 oz., quarts/liters, and gallon/~3.8 liter bottles.