Myron L MLJ-PS6SI, Operation Manual

Page: 23 / 56

19
A. Memory Storage
1. While displaying a
measurement, press
to record the
displayed value.
2. “ MEMORy ” will appear
and the temperature display
will be momentarily replaced
by a number (1-100) showing the position of the record. Figure
9 shows a reading of 1806 µS stored in memory record #4.
B. Memory Recall
1. Press any measurement key.
2. Press , “ MEMORy ” will appear, and the display will
show the last record stored.
3. Press or to scroll to the record location desired
(the temperature display alternates between temperature
recorded and location number).
4. Press to display time and date stamp.
5. Press any measurement key to leave memory recall or allow to
automatically turn off.
C. Clearing a Record/Memory Clear
After recalling a certain record location, press and HOLD to
clear that memory. This space will be the place for the next memory
record, unless you scroll to another empty position before ending the
recall sequence. The next memory stored will go into the next highest
available memory location.
Example:
You have locations 1-7 filled and wish to clear the
conductivity reading stored in record location # 3 and replace it with a
pH reading.
1. Press and scroll to location # 3 .
2. Press and HOLD to clear old record # 3 .
3. Fill pH/ORP sensor well with sample.
Figure 9
° C
KCl
COND
MEMORY