SDM107 / SDM185
18
ir or replace, free of charge, the video product(s) in
Myron & Davis warrants to the original purchaser a non- transferable warranty to repa
materials and workmanship under normal use and conditions for a period of one (1) year from date of purchase.
Limited warranty excludes:
Labor cost for removal, reinstallation, and trouble shooting of the video product(s).
Damage to DVD discs, CDs, videotapes, accessories, or vehicle electrical parts.
Damage due to improper installation, modification of existing equipment, abuse, neglect, or improper service.
Damage due to accidents, fire, theft or vandalism.
TROUBLE SHOOTING
PROBLEM
SOLUTION
PROBLEM
SOLUTION
PROBLEM
SOLUTION
Poor in vehicle
ra
Check the condition of the vehicle’s
radio ant
No sound or
Make sure your DVD player is
connect
ake sure all
Picture is
The disc might be
d
other
dio reception
enna.
Verify that the antenna is fully
raised.
Try change the FM modulators
frequency from the OSD menu.
distorted sound
ed properly. M
cables are securely inserted into
the appropriate jacks.
If you are using the IR
headphones, make sure you turn
on the IR power.
Make sure Modulator‘s frequency
has been proper selected.
distorted
amaged. Try an
disc.
It is normal for some
distortion to appear
during forward or
reverse scan.
IR sensor
inoperative
Verify that the batteries in the
remote are fresh
Can’t advance
through a movie
Verify that the remote sensor eye is
not obstructed.
You can’t advance through the
opening credits and warning
information that appears at the
beginning of movies because the
disc is programmed to prohibit
that action.
Disc won’t play
sc with the label side
facing up.
Insert a di
Check the type of disc you put into
disc tray. This DVD only plays
DVD’s, audio CDs and MP3s.
Both the unit and the disc are coded
by region. If the regional codes
doesn’t match, the disc can’t be
played. This DVD play is Region
Number 1
Play starts, but
then stops
Invalid key
appears on
No forward or
reverse scan
scs have
sections that prohibit
immediately
The disc is dirty. Clean it.
Condensation has formed. Allow
player to dry out.
screen
The feature or action can’t be
completed at this time because:
1.
The disc’s software restricts it.
2.
The disc’s software doesn’t
support the feature.
3.
The feature is not available at
the moment.
4.
You’ve requested a title or
chapter number that is out of
range.
Some di
rapid scanning or title
and chapter skip.
If you try to skip
through the warning
information and
credits at the
beginning of a movie,
you won’t be able to.
This part of the movie
is often programmed
to prohibit skipping
through it.
LIMITED ONE-YEAR WARRANTY (NON-TRANSFERABLE)
Summary of Contents for SDM 107
Page 20: ...SDM107 SDM185 20 NOTES...
