MY9052 USER MANUAL
pg. 4
GB
The speaker will prompt, “Device disconnected”
Please Note:
(1) Using this function need 2 pcs power on
MY9052
speakers
(2) Before the TWS pairing, both two speaker did not connect to other Bluetooth device,
the two speaker’s
buttons all are flashing in blue
(3) If these two MY9052 speaker paired with a third MY9052 before. You need to delete
the pairing memory first; otherwise, these two speaker cannot pair successfully. Please
long press both these two speaker’s
button to delete the TWS paring memory.
3. Micro SD Card Music Playing
Inserting the Micro SD Card into the speaker (See below picture), short press the
button to enter the memory card mode, the speaker will play the Micro SD card music
directly. Speaker will prompt “memory card mode”.
4. AUX IN
Mode
Use the 3.5mm audio cable included to connect the speaker to an audio source (PC,
MP3/MP4, mobile phone). Short press the
button to enter “AUX IN” mode (the
speaker will prompt “AUX IN” mode). The speaker will play the music from the audio
source.
Please Note:
When the speaker connect to the PC via the AUX IN cable to play music. We suggest
use the branded adaptor (5V 1A) instead of the PC USB Port to charge the speaker. As
the computer’s power, supply is weak.
Make sure the speaker is under AUX IN mode when using this function.
