5 |
P a g e
STEP 5: Finish up!
Test all functions.
The remote start will engage when you press the ‘lock’ button on your factory key fob 3 times in
succession. After confirming that everything works properly, secure the remote start module and all the wires connected
to it. Make sure none of the wires interferes with any of the moving parts under the dash. Replace the plastic panel that
surrounds the ignition switch.
Cap off or tape the ends of any wires
you’re not using to prevent accidental grounding or other contact. Be particularly
careful with the unused heavy-
gauge wires in the remote start’s power harness. Now gather up all your wiring and neatly
bundle it together using zip ties or electrical tape. Find a secure place to put the remote start module and use zip ties to
secure it.
Copyright 2016 Digitel LLC
Summary of Contents for EVO-GM4
Page 2: ...2 P a g e...
