©
2014 myPhone. All rights reserved.
myPhone S-Line
ENG
Memory card inserting
Use only memory cards compatible and approved by myPhone.
Incompatible memory card may damage itself and the device
and remove stored data. Incompatibility of memory card can be
caused by incorrect card format (micro SD format is required)
or unsupported card size (over 32GB). To insert the memory
card correctly follow the directions:
•
Turn off the phone and take off the back cover
(undermining the slot located in the left corner of the
base of the phone with your nail).
•
The memory card slot is located above the battery on the
right. Following the drawing insert the memory card into
the slot.
Battery inserting
To insert the battery:
•
Turn the phone back cover up.
•
Take off the back cover (undermining the slot located in
the left corner of the base of the phone with your nail).
•
Insert the battery (pay attention to the correct orientation
of the battery contacts and phone contacts – these should
be adjacent to each other).
•
Replace the back cover.
Battery charging
The battery should be charged prior to the first turning on the
device. Charge the battery with the kit charger. The device has
a battery capacity of 1800mAh. In case of any problems with
the battery - the device must be provided to myPhone service
center.
Use only chargers and cables approved by myPhone. Using
unapproved chargers or cables could cause an explosion or
damage the battery in other way. When the battery is low a
message “low battery” appears on the screen. Charge the
battery to continue using the device. After complete
discharging the battery the device cannot be turned on even
while charging.
10
