© 2019 mPTech
. All rights reserved. HALO Q
8
jack
headphones are equipped with a microphone).
21
Phone
connectors
Allows you to connect to the base and charge the battery.
22 MicroUSB port
When connected, the charger enables recharging the battery.
You can transfer data (photos, videos, music) when you
connect it to your computer.
23
<Search>
button
Enables to search for a phone by activating a sound.
24
Base
connectors
Allows you to connect the phone to the base and charge the
battery.
25 Base microUSB
port
When the charger is connected, it allows you to charge the
battery in the phone connected to the base and use the phone
search option.
26
Base LED
diodes
The LED indicates that the power supply is connected to the
charging base.
Turning the phone on/off
To turn the phone on/off press and hold the <Red handset> button. If you are
prompted to enter a PIN code as soon as the phone is switched on, enter the PIN code
(you will see it as ****) and press the [Menu] key.
Inserting SIM, memory cards and the battery
If the phone is switched on - switch it off. Remove the back cover of the phone - use
your fingernail to raise it using the gap in the case. Insert the SIM card/s - Card/s
is/are supposed to be placed with its gold contacts facing down, the way in which the
slot is placed. Insert the memory card - to open the flip of the card reader slide it
delicately down. Insert the microSD memory card with its gold contacts facing down,
the way in which the slot is embossed. Close the flip by sliding it towards the center
of the phone. Insert the battery so that its gold contacts touch the tripple connector
in the phone bay. Put on and gently press down the cover until you hear the click of
the latches. Make sure the cover is well attached.
Charging the battery
Charging without the cradle charger
Plug the microUSB plug of the cable into the charging socket on your phone and the
USB plug into the charging socket on the charger Subsequently connect the charger
plug into the power grid
*Attention: Improper connection of the charger cable can cause serious damage to the
phone and/or the charger. Damage caused by improper use of the phone and its
accessories is not covered by the warranty.
The icon
(or similar) will appear during charging and when the battery is fully
charged. When charging is complete unplug the charger from the power outlet. Unplug
the cable from the socket on the phone.
Charging with the cradle charger
Plug the microUSB plug of the cable into the charging socket on your phone and the
USB plug into the charging base socket, then plug the charger plug into the power
oulet. Place the phone in the charging base.
*Attention: Improper connection of the charger cable can cause serious damage to the
