ENGLISH
1.
Thin end of the cable connect to the device (as is shown in the
picture above).
2a.
To charge the unit from the wall outlet, plug the USB tip (thicker) to
the adapter and the adapter into a wall outlet.
2b.
To charge a device through a USB port on your computer, connect
the USB cable to the USB port on your computer.
If the battery was completely discharged, it may take a few minutes
before you see the loading animation. Only when you see the animation
you can use the phone.
After charging do the following:
◦
unplug the charger from the mains power 230V;
◦
disconnect the charger from the phone.
Battery loading
•
First plug in the charger and then connect it with the phone.
•
When the phone is switched on during charging the battery, the battery
charge indicator in upper right corner of the display flashes or in other
active way informs us about charging status.
•
If you charge the battery when your mobile phone is switched off the
only thing you can see on display is battery charging status indicator.
•
After the battery is completely charged the battery charging status
indicator is constantly highlighted.
•
The charging process lasts for 3 – 4 hours.
Attention!
:
If the phone battery is being charged accidentally – the battery is being
charged without waiting until it's completely discharged. This significantly
shortens its operating time. It is possible to recover the battery to some extent
by formatting process. There are many different views concerning formatting
Li – Ion or Li – Pol links which apparently do not have a side effect of
recharging but certainly it won't do it any harm.
Copyright © 2010
myPhone
. All rights reserved.
12
