MyoPro Quick Start Guide: Troubleshooting
Myomo Inc. | One Broadway 14
th
Floor | Cambridge, MA 02142
TEL: 877.736.9666
www.myomo.com PN: 27533 Rev: 001
EMG settling time.
If jerkiness is noted when the MyoPro is
turned on, there may be noise from static. Return to stand-by
mode and stay relaxed for 1 – 2min, then try again.
MyoPro is not moving/responding
Check to see if the MyoPro is in
Standby mode.
Sensitivity is set too low or threshold is set too high.
Settings
in MyConfig may need to be adjusted.
The
user should be relaxed
when selecting modes.
Make sure the user is
activating the right muscle group(s) for
the mode.
BICEP MODE
:
squeeze bicep to bend, relax to straighten
TRICEP MODE
:
squeeze tricep to straighten, relax to bend
DUAL MODE
:
squeeze bicep to bend, squeeze tricep to
straighten
CLOSE MODE:
squeeze fingers or bend wrist to close, relax to
open
OPEN MODE:
extend fingers or bend wrist back to open, relax
to close
DUAL MODE:
squeeze fingers to close, extend fingers to open
Low battery:
indicated by
100%
75%
50%
25%
Push here
Color of power button
Sensors need to be wiped or cleaned
(clean with alcohol prep
pad)
User is perspiring
(skin should be clean and dry)
If perspiration is a frequent issue, Certain Dri can
help. This is found in any drugstore in the deodorant
section. Apply lightly, the night before.
How to charge the battery
Push button to
open battery
compartment
Remove battery,
charge on cradle
WARNING: This quick reference guide does not replace the device user manual. Always refer to user manual for
more complete and detailed instructions.