myomo myopro 2+ Motion G, User Manual, Page: 22 / 49

PN 28010 Rev 001 22
9. Rotate the hand motor back to the position over the back of the hand by depressing the tilt lever and
simultaneously rotating the hand motor back to the closed position. The tilt lever will toggle when the
motor assumes the correct position.
10. Attach the finger saddle . First position the finger saddle on the end of your index and middle fingers with
the finger loop emerging from between your fingers. Then position the finger loop around the anvil ‐ you
may pull the anvil down towards the loop without damaging the motor . Push on the back of the finger
loop while pulling up on the finger saddle. Once the latch toggles, the finger saddle is locked in place.
11. Secure the forearm shell . Velcro the forearm liner ends together. Close the forearm shell and attach the
forearm magnetic latch to the forearm buckle base . Secure the forearm strap completely by closing the
forearm buckle. Lock the forearm buckle clasp .
8 Move the hand motor back into place
10 Place the finger saddle under the fingers, and then lock onto the anvil