24
24
24
24
20-10026 Rev 1.0.0
1309 Beacon Street, Suite 300
Brookline, MA 02446
1.
Make sure the iPad and mScan™ device is sufficiently charged (>50%) to conduct the
study.
2. Make sure the iPad is connected to a WiFi network with good Internet connection
Electrical Safety and Standards
The
mScan™
device has been tested and found to be appropriate for use at home and clinical
setting. In most cases, it should not interfere with other devices if used as instructed. However,
the device gives off radio frequency (RF) energy from the Bluetooth feature. If not used
correctly, the
mScan™
device may interfere with TV, radio, or other electronic devices that
receive or transmit RF signals.
While
mScan™
device is in operation, other electronics wireless devices that are used nearby,
such as another mobile device or a wireless network, may prevent or delay the transmission of
data between your
mScan™
device and your iPad with
mScan™ App.
Moving away from or
turning off these electronic devices may allow communication.
If you experience
mScan™
device interference problems, try moving your
mScan™
device away
from the source of the interference. You can also move the electronic device or its antenna to
another location to solve the problem. If you continue to experience interference, contact
Customer Service.
This
mScan™
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This
mScan™
device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation. However, changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
mScan™
device.
FCC guidelines help ensure that the
mScan™
device will not affect the operation of other
nearby electronic devices. Additionally, other electronic devices should not affect the use of
mScan system.
mScan™
device has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1)Reorient or relocate the receiving
antenna; (2) Increase the separation between the equipment and receiver; (3)Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) contact Customer Service for help.