MyNav MN700 BIKE PRO, User Manual

Page: 30 / 104

30
CORRECT BIKE MOUNT PLACEMENT:
INSTALLATION:
WARNING: the cable ties and the mount hold
steady on the handlebar. The device instead can
be removed just pulling down the safety lever and
slide it out.
Warning! Follow these instructions for
a correct installation of the mount on
the bike:
NO
Switch on the device. The device is now ready to be
used.
Place the mount on the handlebar in the position you
prefer, and fi x it with the cable ties.
Slide the device on the mount (trough the lead-lines
present on its back) until you hear a click.
Stick the double-sided tape and then fi x the rubber
pad to the back of the mount.
Install the cable ties in the mount.
HOW TO INSTALL ON
THE BIKE
YES