...
...
Stagebox with built- in signal split
The multicore for the main mixing console has a stage
box with built in split capability: in this case it's only
necessary to use an external mic pre amp to get the
signal to the IEX-16L.
Signals from a Microphone Splitter/Pre Amp
9
Combined Signal Splitter/Pre Amp
The multicore system has no split capability: in this case
a mic splitter with built in mic preamps should be used.
The direct signal is fed to the main console via the
stagebox, while the split signal is fed to the IEX-16L for
monitors.
Input Signal,
e.g.
microphone
Multicore to
Main Console
Split Input Signal
Microphone Pre-
Amplifier with
balanced outputs
(TRS)
DB-25 to balanced
1/4" Jack (TRS)
IEX-16L
Network Switch
Microphone Splitter with
integrated Pre-Amp
The best guarantee of independence between monitor and main mix signals is provided when the signal is split right after
the source and fed to the main mixing console and the myMix monitoring system separately. Thus any alteration of the
signal is only audible within the respective system. Changes to main mix signals don't affect the monitor system signals,
and vice versa. Usually there are two options available:
Multicore to
Main Console
Input Signal,
e.g.
microphone
DB-25 to XLR
female
IEX-16L
Network Switch