7. Mounting the handlebar post
Screw the four pre-assembled hexagonal socket screws (3), four washers (4), and the
nuts (36) to the base. Ensure that the pedal resistance regulator (12) is set to level 1.
Insert the handle bar column into the base. Connect the upper computer cable (32) and
the lower computer cable (30) ensuring that the connection is correct so as to allow the
signal to be transmitted to the computer. Connect the upper pedal resistance cable (33)
and the lower pedal resistance cable (31). Ensure the cable connections are inside the
frame. Otherwise the cable could be damaged.
Figure 6
11
Summary of Contents for BP210
Page 15: ...Spare parts 15...