Mylex FlashPoint BT-930, Installation Manual And User'S Manual

Page: 35 / 70

Adapter and Device Configuration
Manual No. 3000863 3-9
Figure 3-5. Locating the Adapter
2. When you have found the adapter, press any key to return to the
Adapter Configuration menu.
Resetting Factory Defaults
You can reset the adapter parameters to the factory default settings.
1. Highlight Load Factory Default and press <Enter>. For a list of the
settings see Table 3-3. Default values are shown in BOLD ITALIC
TYPEFACE .
Figure 3-6. Load Factory Default
2. Respond to the warning message shown in Figure 3-7. When you select
Yes the default settings are loaded and the system reboots. The factory
default settings take effect after the system reboot.
NO