Windows NT
18
eXtremeRAID DAC1164P Quick Installation Guide
12. With the Software Kit diskette still in the floppy disk drive, press
<Enter>.
13. Select the Mylex Accelerated Disk Driver in the list and press
<Enter>.
14. If you have drivers to install for other controllers (for example, an on-
board SCSI controller to run other devices such as a CD-ROM drive,
etc.), repeat Step 6 and Step 7. Then when prompted, insert the
manufacturer’s supplied hardware support disk, press <Enter>, and
select the appropriate driver from the list.
If you have no other drivers to install, or when you have finished
installing other drivers, simply press <Enter> to continue installation.
15. Insert Windows NT 4.x setup diskette #3 when prompted.
16. Follow the on-screen instructions to continue Windows NT 4.x
installation, inserting the Windows NT CD-ROM into the CD-ROM
drive when prompted. Press <Enter> and continue with the next few
Windows NT 4.x installation screens.
17. When prompted again for the “DAC960 Software Kit” diskette, insert
the NT/NW drivers diskette into the floppy disk drive and press
<Enter>.
If you installed other drivers from other diskettes, you will be asked to
reinsert those diskettes as well.
This concludes Mylex Disk Array Controller driver installation for Windows
NT 4.x. Follow the on-screen instructions to complete your installation of
the Windows NT 4.x operating system.
For more detailed information on operating system, driver installation, and
GAM Server, see the Disk Array Controller Software Kit Installation Guide
and User Manual (P/N 771929). To install the GAM client, refer to the
Global Array Manager Client Software Installation Guide and User Manual
(P/N 771961).
Summary of Contents for eXtremeRAID
Page 2: ......
Page 27: ......
Page 29: ...Register fm Page vii Wednesday March 24 1999 1 49 PM...
Page 30: ...Register fm Page viii Wednesday March 24 1999 1 49 PM...
