Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 60 / 172

Global Array Manager Server Software for Windows NT 4.0
3-12 Disk Array Controller Software Kit User’s Manual
Global Array Manager Server Software for
Windows NT 4.0
Installation Overview
Installation of the Global Array Manager Server component requires the
Windows NT operating system. It will not work on a Windows 95 or
Windows 98 operating system.
Reminder: This chapter assumes that the network administrator for this site
will be performing these installation procedures.
You may also choose to install GAM Client at the same time on the same
system. Refer to the Global Array Manager Client Software Installation
Guide and User Manual (P/N: 771961) for GAM Client installation
instructions.
Installation of Global Array Manager Server
File List
Global Array Manager software is shipped on an accompanying distribution
CD-ROM. The file list (and path) is as follows (where X: represents the drive
letter of your CD-ROM drive):
X:\GAM\NT\
_INST32I.EX_ DATA.TAG SETUP.EXE
_ISDEL.EXE DATA1.CAB SETUP.INI
_SETUP.DLL LANG.DAT SETUP.INS
_SYS1.CAB LAYOUT.BIN SETUP.LID
_USER1.CAB OS.DAT