Mylex DAC960PG, Installation Manual

Page: 71 / 106

Start-up Sequences
Manual No. 771971 4-5
Figure 4-3. BIOS Options Menu Prior to Exit
BIOS Enable or Disable
The default for this option is for the BIOS to be enabled. Disabling the
BIOS prevents the DAC960PG from being the boot controller. While the
BIOS is disabled, it will not be possible to make changes to the other BIOS
options.
CD-ROM Boot Disable or Enable
The default for this option is for the CD-ROM boot to be disabled (e.g., the
system will boot from a hard drive. If a bootable CD is installed in the CD-
ROM drive, the system can boot from the CD if this option is set to enabled.
If the CD-ROM boot option is enabled, the CD-ROM will take priority over
the disk drives. For example, under MS-DOS, the disk drive that is normally
Drive C: will become Drive D. All subsequent drive IDs will similarly be
moved down.