INSTALLING BATTERIES:
1.
If the detector is on, turn VOLUME (on the control housing) to
OFF.
2.
Press on the correct battery compartment cover and slide the
cover off in the direction of the arrow. Please note this unit only
requires 1 x 9v battery (not supplied) in the compartment
shown. The other battery compartment is fixed shut and should
not be forced open.
This compartment is fixed,
DO NOT
force open.
Correct battery department
.
3. Insert 1 x 9V battery into the compartment shown above.
4. Replace the cover. Your unit is now ready for use.
Caution:
⚫
Use only fresh batteries of the required size and recommended
type.
⚫
Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries of
different capacities.
⚫
If the detector is not to be used or to be stored remove the
batteries to avoid leakage.
USING EARPHONES:
You can connect a pair of earphones (supplied) to the detector so you
can listen to it privately. Using earphones also saves battery power
and makes it easier to identify subtle changes in the sounds you hear,
for better detection results.
Listening Safely:
To protect your hearing, follow these guidelines when you use
earphones.
•
Set the volume to the lowest setting before plugging in the
earphones. Carefully adjust the volume to a comfortable level.
•
Do not listen at extremely high volume levels.
•
Once you set the volume, do not increase it. Over time, your
ears adapt to the volume level. High Volume levels can cause
discomfort and damage your hearing.
Summary of Contents for MYMD1062
Page 4: ...www hsdonline co uk...
