www.hsdonline.co.uk
7
Assembly
BLADE AND GUARD ASSEMBLY
To assemble the grills and fan blade, refer to Figure 3:
1. Unscrew the "
Fan Securing Nut
" clockwise and remove from the motor shaft
(This plastic nut is to hold the blade on when re-assembling).
2. Unscrew the "
Guard Securing Nut
" anti clockwise and remove (This plastic nut is
to hold the rear guard in place when re-assembling).
3. Place the "
rear grill guard
" into the proper position with the
Handle
facing up.
(Step 1,2 and 3)
4. Screw on the "
Guard Securing Nut
" clock wise to secure the rear grill guard into
place. (Step 1,2 and 3)
5. Discard the
Plastic Motor Shaft Sleeve Protection
located on the
Motor Shaft
.
6. Carefully install the
Fan Blade
onto the
Motor Shaft
aligning the rear fan grooves
with the motor shaft retaining pins. (Step 4 and 5)
7. Screw on the "
Fan Securing Nut
" anti clockwise to secure the fan blade in
place. (Step 4 and 5)
8. Place the rim of the
Front Grill
onto the
Rear Grill
aligning up the two holes at
the bottom of the grill. Secure both grills firmly by tightening the fan grill locking
grips around the circumference of the guards and using the screw and nut
provided. (Step 7)
NOTE: You must complete assembling fully; otherwise you cannot switch on fan.
STEP 1.2.3
STEP 4. 5.
STEP 6.
STEP 7.
