www.hsdonline.co.uk
6 USING THE SIGHT LIGHT
The sight light allows you to keep a
clear view under less illuminated
circumstances. To turn on the light
simply press the trigger switch. When
you release the trigger switch, the
light switches off.
7 DRILL
When drilling into a hard smooth
surface, use a centre punch to mark
the desired hole location. This will
prevent the drill bit from slipping off
centre as the hole is started. Hold the
tool firmly and place the tip of the bit
at the point to be drilled. Depress the
trigger switch to start the tool. Move
the drill bit into the workpiece,
applying only enough pressure to
keep the bit cutting. Do not force or
apply side pressure to elongate a
hole.
NOTE: If your tool stops working when
drilling a hole automatically, it’s
normal. This is the electrical
protection for battery. Completely
release the trigger switch, then
depress it to start the tool again.
DISPOSAL OF AN EXHAUSTED
BATTERY PACK
To preserve natural resources,
please recycle or dispose of the
battery pack properly. This battery
pack contains LI-ION batteries.
Consult your local waste authority for
information regarding available
recycling and/or disposal options.
Discharge your battery pack by
operating your drill, then remove the
battery pack from the drill housing
and cover the battery pack
connections with heavy duty
adhesive tape to prevent short circuit
and energy discharge. Do not
attempt to open or remove any of the
components.
MY18VCB_18V_Drill_Manual 17/5/18 10:21 Page 10
