Step 8 – Inject the Dose
8B
Press the Injection Button to start
the injection. You will hear a “CLICK”
when the injection has started.
Continue to hold the Autoinjector
down against the injection site.
You will see green hash marks
in the Viewing Window as the
medication is injected.
When the injection is complete,
a check mark will be fully visible
inside the window.
If you cannot see the Viewing
Window, slowly count to
10 seconds after pressing
the Injection Button and
hearing the fi rst “CLICK.”
DO NOT
lift up early.
8A
Gently place the Autoinjector straight
on the injection site (not at an angle).
Make sure you can comfortably
reach the orange oval Injection Button.
If possible, position so you can see
the Viewing Window.
Gently press the Autoinjector down
until the Needle Depth Setting
Number is no longer visible. This
will release the safety lock so the
Injection Button can be pressed.
23
