OPERATING YOUR DRYER
• Turn your dryer on by pressing the
Power
button.
• Select your desired drying program
by pressing the
Program
button.
• Select the
Dryness Level
and
Anti-Crease
buttons if you wish to
select different options from the
default settings.
• Begin your cycle by pressing the
Start/Pause
button.
AT THE END OF THE CYCLE
• The dryer will alert you with an
audible sound once the program
has finished its cycle.
• Turn your dryer off by pressing the
Power
button.
• One or two minutes after you have
turned off the dryer, take out your
dry clothes.
• Be sure to clean the lint filter after
each use.
CLEANING THE FILTER
• Make sure the dyer has safely cooled
down before cleaning the dyer or any
of its parts.
• To remove the filter, open the door
and grip the filter (➍) and pull it
straight up and out of the drum.
• Clean the lint filter by wiping it with
a soft, damp cloth, or wash it gently
under running water.
• Allow the filter to dry completely
before reinstalling it. Press down
gently to secure it in place.
ANTI-CREASE FUNCTION
• Press the
Anti-Crease
button to
activate this function.
• After the drying program has finished,
the dryer will continue to rotate
the drum (without heat output) for a
maximum time of 2 hours, or until the
door is manually opened to minimise
creasing of your load.
BEFORE EACH USE:
Check that the lint filter (➍)
is clean and the drum is drained. When you load
the items into the dryer drum, ensure there is
nothing blocking the door and that it clicks shut.
Model: MVD7
Support: 1300 11 4357
www.mykin.house
part of the family
Key
➊ Control panel
➋ Door
➌ Drying drum
➍ Lint filter
➎ Front vent flange
getting
me
started
1
2
4
3
5
