MYiR MYD-AM335X Page 72 Development Manual Download

Page: 72 / 100

Figure 6-1 Write 'sdcard.img' to TF/SD card with 'win32diskimager'

Put a TF card into the card reader, and connect the card reader to Windows

host PC.

Write

sdcard.img

to the TF card with win32diskimager.exe as shown in Figure 6-

1 above.

After writing, power off the MYD-AM335x series development board, put the TF

card to its TF slot(J19), set the board to boot from TF/SD card by J5.

Power on the MYD-AM335x series development board, it will boot from TF card

and mount the second partition of the TF card as root file system.

Boot from TF/SD card(Ramdisk file system)

Note: HP USB Disk Storage Format Tool will clear original partitions of the

TF card. To save the partitions, please use the formatting software

provided by the computer system.

Note: The size of ramdisk.gz is smaller

than 32MB.

Format TF card

Summary of Contents for MYD-AM335X





































































































Search results

Summary of Contents for MYD-AM335X

Reviews:

Related manuals for MYD-AM335X

Brands by name

Popular brands

MYiR MYD-AM335X, Development Manual

Search results

Summary of Contents for MYD-AM335X

Reviews:

Related manuals for MYD-AM335X

Brands by name

Popular brands