5
myGEKKO RIO 29
Art. Rio-29
1.2 Software activation on the myGEKKO
Log in as configurator.
1. Change to the system menu -> SMS/E-Mail -> IO configuration.
2. Select ‘Serial’ under modem connection and then the port to which the module
is connected.
3. Save the PIN of the SIM card in the card pin section. It is important that the PIN is saved
before the modem gets connected to avoid wrong PIN requests.
The section ‘Connection reset’ indicates the time intervals in which myGEKKO is going
to control the SIM card.
4. Now connect the GSM module to the interface.
5. Done! Now you can use the GSM module to send and receive messages.
PIN:
1 +24VDC
2 free
3 free
4 +24VDC
5 free
6 GND
Instead of using the included power supply 24VDC supply may be used alternatively to power the
GSM module. For this purpose the GSM module has to be connected as follows:
Summary of Contents for GSM/SMS module
Page 1: ...User Manual GSM SMS module E Mail V 0 3...
Page 7: ...7 Notes...
